I feel like a can’t really call this skirt a pencil skirt because it doesn’t go in enough at the legs so I think I’ll call it a straight skirt instead. This was my first attempt at lining a skirt and it went fairly well. I only attached it at the waistband and the zip as I was afraid that if I hemmed it to the outer material it would affect the drape. I wish I had interfaced the waistband as I can now see why you’d want to because it just isn’t stiff enough. I didn’t sew the zip in high enough so had a little gap between the end of the zip and the waistband so instead of unpicking the zip I cut out a patch of the same fabric and sewed one side to the left hand side and sewed a popper to the other. It worked but it definitely wasn’t the correct way to do it.
The pattern I used was New Look 6335. It was an unlined pattern, but I just cut the same pieces as I did for the outside, excluding the waistband. I ended up cutting so much off the length that the split went entirely which does make it more difficult to run to the bus stop in the mornings. NB: Next time, please put one in! The only adjustment I made was to shave a couple of inches off each side to fit my baby hips.
As you can see in the pic above, I had a few issues with darts. Typically, a week later we did darts in textiles and so now I know exactly what to do. Funnily enough, the teacher pointed out this skirt as an example of darts. I should probably have let her know that I made it. The table below is one I made as part of my coursework and I thought that it might be useful for some people.
This pic just shows off the lining underneath. I was rushing so both the lining and the exterior fabric were hemmed by the machine. The issue I’m having is that the lining is so slippery that it twists the skirt around as I walk. Maybe this is because It just isn’t tight enough?
Yay, you can’t really see the zip in the back! Instead of the button and buttonhole required by the pattern I used a popper. I tried to make a buttonhole. It was perfect on the practice time, the moment I put the real thing through the machine I get nothing. And I didn’t change anything! Argh it’s so frustrating. But a popper will do for now, until I figure out how to do them.
‘Til next time,
Lauren x